Skip to main content
TDEC
NDAQ-25016 module: flat black plug-in card with four circular push-pull connectors on the front panel

NDAQ-25016

  • 2–8 channel synchronous sampling at up to 250 KSps
  • 16-bit ADC resolution, dynamic range >90 dB
  • SNR >82 dB, channel crosstalk <-90 dB
  • NDAQ-25016E: 64 MB per channel; NDAQ-25016F: 128 MB per channel; NDAQ-25016T: 256 MB per channel
  • USB 3.0 and Gigabit Ethernet interfaces
  • Oscilloscope mode and real-time analysis support
  • Metal shielding with floating-ground measurement

Need selection advice or an on-site demo? Use the buttons above and our engineers will reach out shortly.

Specifications

ItemNDAQ-25016ENDAQ-25016FNDAQ-25016T
Measurement Performance
Channels842
Max Sample Rate250 KSps
Sample Rate Settings16
ADC Resolution16 bit
Range±10 V、±5 V、±1 V、±500 mV
Capture & Storage
Capture Length per Channel (Bytes)64 MB128 MB256 MB
Internal TriggerEdge / window trigger
Analog Performance
Accuracy (FS)Better than 0.3%FS (DC)
Bandwidth100 kHz
SNRBetter than 82 dB
Intra-module Channel Phase Difference0.3°@1K
Inter-module Channel Synchronisation4000nS
Signal Conditioning
ICPNo
ThermocoupleNo
Differential InputNo
CurrentNo
StrainNo
ResistanceNo
ChargeNo
AmplifierNo
Trigger & Communication Interfaces
Standard External TriggerYes
Break-screen External TriggerNo
Wi-FiNo
4GNo
BeiDouNo
USBYes
EthernetYes
Mechanical, Power & Environment
Dimensions250 mm×185 mm×26 mm
Power SupplyExternal DC 24 V
Operating Temperature-20 °C–60 °C
Additional Specifications
Dynamic RangeBetter than 90 dB
Channel CrosstalkBetter than -90 dB
Power Consumption12 W
External Trigger Level & Edge5 V TTL/CMOS, rising / falling edge

Related scenarios

Power Transient Signal Measurement

Microsecond-to-nanosecond waveform capture for insulation diagnostics and power quality

Used alongside:HDAQ SeriesiMS View

P-T Curve Testing

High-precision characterisation of transient pressure-time curves

Used alongside:iMS View

Other Applications

Wind tunnel, Hopkinson bar, PDV and avionics specialty tests

Used alongside:PDVGUXI SeriesiMS View

Downloads

FAQ

How do I choose between NDAQ-25016, NDAQ-20024 and NDAQ-1616?
NDAQ-25016 runs at 250 KSps, 16-bit, covering dynamic signals within 100 KHz. For 24-bit weak-signal measurement choose NDAQ-20024; above 100 KHz choose NDAQ-1616 or faster.