Skip to main content
TDEC
P-T testing illustration: pressure curves on a monitor, a burning closed vessel and rows of pressure sensors

P-T Curve Testing

Highlights

High-precision characterisation of transient pressure-time curves

For pyrotechnics performance evaluation and QA. Combines high-accuracy pressure sensing, high-speed synchronous acquisition and dedicated analysis software to obtain P-T curves inside closed bombs and measure key indicators such as peak pressure, burn time, delay time and heat of explosion.

  • Strict, traceable acceptance criteria: product acceptance relies on the P-T curve, peak pressure, delay time and action time, which must meet industry criteria and be traceably archived.

  • Extremely short action time: from initiation to peak pressure typically takes milliseconds to microseconds — slow-response instruments cannot reconstruct the full process.

  • One-shot destructive testing: each sample is consumed in a single shot and data cannot be redone, making trigger reliability and recording integrity the primary constraints.

  • Restricted test environment: tests run inside closed bombs or dedicated blast chambers, requiring remote control and long-distance data backhaul with no personnel nearby.

System architecture

P-T test system architecture: inside the closed vessel or blast chamber, microsecond transient pressure signals from the pressure sensor and sync triggers from the ignition control system feed the PVIB2.0 Bus Series multi-channel modular measurement & control instrument; data reaches iMS View Virtual Instrument Software in the safe zone over wired LAN, WiFi or offline drive retrieval, which provides real-time P-T curves, automatic peak/delay/burn-time extraction, acceptance judgment, one-click test reports and full history archiving.

Related equipment

Product Application Papers

Summary
Authors
杨钧森、金丰凯、吉康语、吴海波、武毅
Source
含能材料 · 2025
Keywords
GAP固体推进剂;烤燃响应;高速纹影成像;喷管结构约束

研究喷管喉径对GAP基固体推进剂烤燃响应的影响:搭建带喷管结构试验件的加热与控制系统,用高速纹影成像记录点火后的全过程,同时测量试验件温度和响应产生的冲击波超压。结果显示喉径小时易发生壅塞、压力与燃速相互推高并转为爆轰,喉径大时则不易转爆轰、试件保持完整。

Downloads