
NDAQ-20024
- 4–8 channel synchronous sampling with 24-bit ADC resolution
- Dynamic range >100 dB, SNR >96 dB
- Ultra-low-noise amplifier for high-precision weak signal measurement
- NDAQ-20024E: 64 MB per channel; NDAQ-20024F: 128 MB per channel
- USB 3.0 and Gigabit Ethernet interfaces
- Oscilloscope mode and real-time analysis support
- Metal shielding with floating-ground measurement
Need selection advice or an on-site demo? Use the buttons above and our engineers will reach out shortly.
Specifications
| Item | NDAQ-20024E | NDAQ-20024F |
|---|---|---|
| Measurement Performance | ||
| Channels | 8 | 4 |
| ADC Resolution | 24 bit | |
| Max Sample Rate | 200 KSps | |
| Range | ±10 V、±5 V、±1 V、±500 mV | |
| Sample Rate Settings | 16 | |
| Capture & Storage | ||
| Capture Length per Channel (Bytes) | 64 MB | 128 MB |
| Internal Trigger | Edge / window trigger | |
| Analog Performance | ||
| Accuracy (FS) | Better than 0.1%FS (DC) | |
| Bandwidth | 100 kHz | |
| SNR | Better than 96 dB | |
| Intra-module Channel Phase Difference | 0.3°@1K | |
| Inter-module Channel Synchronisation | 5000nS | |
| Signal Conditioning | ||
| ICP | No | |
| Thermocouple | No | |
| Differential Input | No | |
| Current | No | |
| Strain | No | |
| Resistance | No | |
| Charge | No | |
| Amplifier | No | |
| Trigger & Communication Interfaces | ||
| Standard External Trigger | Yes | |
| Break-screen External Trigger | No | |
| Wi-Fi | No | |
| 4G | No | |
| BeiDou | No | |
| USB | Yes | |
| Ethernet | Yes | |
| Mechanical, Power & Environment | ||
| Dimensions | 250 mm×185 mm×26 mm | |
| Power Supply | External DC 24 V | |
| Operating Temperature | -20 °C–60 °C | |
| Additional Specifications | ||
| Dynamic Range | Better than 100 dB | |
| Channel Crosstalk | Better than -90 dB | |
| Power Consumption | 12 W | |
| External Trigger Level & Edge | 5 V TTL/CMOS, rising / falling edge | |
Related scenarios
Downloads
FAQ
- Is NDAQ-20024 suitable for high-frequency transient signals?
- NDAQ-20024 favours resolution (24-bit) and suits weak signals below 100 KHz; for higher-frequency transients we recommend NDAQ-1616 or a faster module.
