PWM / Pulse Module
- 4 simulation outputs plus 4 acquisition channels — stimulus and interpretation close the loop on one module
- Stepped 1V~28V amplitude, adjustable 1Hz~50KHz frequency and 0~100% duty cycle
- Rise / fall time better than 2us
- Per-channel duty cycle at 0.1% resolution, frequency freely set as a 16-bit value
- Programmable auto-forwarding between PWM channels; acquired data stored on the module and forwarded to the zero-slot host
- 100% domestic chips; runs inside the chassis or standalone over gigabit Ethernet
Need selection advice or an on-site demo? Use the buttons above and our engineers will reach out shortly.
Specifications
| Item | Value | Note |
|---|---|---|
| PWM / Pulse Simulation Output | ||
| Channel Configuration | 4 channels | |
| Amplitude | 1V ~ 28V (stepped) | |
| Frequency | 1Hz ~ 50KHz | |
| Duty Cycle | 0 ~ 100%, freely set per channel | 0.1% resolution |
| Frequency Setting | Freely set per channel, 16-bit, 1 ~ 50KHz | |
| Rise / Fall Time | Better than 2us | |
| PWM / Pulse Acquisition | ||
| Channel Configuration | 4 channels | |
| Amplitude | 1V ~ 28V | |
| Frequency | 1Hz ~ 50KHz | |
| Duty Cycle | 0 ~ 100% | |
| Rise / Fall Time | Better than 2us | |
| Data Handling & Storage | ||
| Auto-Forwarding | Programmable auto-forwarding between PWM channels | |
| On-Board Storage | Acquired data stored on the module, capacity managed automatically with the oldest data discarded when full | |
| Host Forwarding | Acquired data forwarded to the zero-slot module (host) | |
| Parameter Persistence | Saved automatically, reloaded at power-on | |
| Platform Common Characteristics | ||
| Mounting | Front-inserted card, quickly swappable | |
| Standalone Use | Detachable from the chassis for standalone use over gigabit Ethernet | |
| Backplane Communication | Power, command, synchronization and status signals unified over the backplane | |
| Localization Rate | 100% | |
| Component Temperature Grade | -40℃ ~ 85℃ wide temperature | |